UTM Face Mask with Integrated Goggles - Non-Berry Compliant

The UTM Face Mask with Integrated Goggles was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force-on-Force training. It was specifically created to work with Ballistic Helmets and allow for proper cheek/stock weld of shoulder fired weapons. The UTM Face Mask with Integrated Goggles offers face, throat and eye protection that is light wearing, breathable, fully flexible and adaptable to all conditions and environments.

Features

• Breathable construction, unrestrictive airflow.
• Chin Strap Extender for use with Ballistic Helmet
• Mask now sits off the face for a cooler and more comfortable fit
• Enables the user to obtain a full stock weld allowing the full use of iron or electronic sights on the weapon.
• Full head protection is achieved when used with the ballistic helmet and recommended helmet (Law Enforcement, NATO style or the US Army's PASGT/ACH or MICH).
• Adequate space for radio equipment, ear and throat microphones
• Unrestricted hearing.
• Does not alter head and equipment spacial relationships in training, unlike fully enclosed training helmets.
• Compliant to the high velocity impact requirements of ANSI/ ISEA Z87.1-2015
• Provides superior protection from ballistic and environmental threats.
• Lenses offer 100% protection from harmful UV-A, UV-B and UV-C rays.
• Abrasion and Fog Resistant Coatings
• Two Options: Berry Compliant or Non-Berry Compliant
• The UTM Face Mask with Integrated Goggles has been approved by the U.S. Army Evaluation Center to be used for force-on-force training when utilizing CCMCK (Close Combat Mission Capability Kit) ammunition.

Care Cleaning and Maintenance

The UTM Protective Face Mask with integrated Goggles is intended to be issued as an item of personal protective equipment (PPE).  The face mask must be cleaned and sanitized upon completion of training.  Lens MUST BE removed before washing mask.

• The face mask cannot be properly sanitized by the use of disinfectant wipes or sprays.  The reommended cleaning method to adequately sanitize the face mask is through washing with the use of domestic washing detergent.
• Prior to washing, firmly close themask's velcro panels.  Closing the velcro will prolong the life of both the mask and the velcro panels.
• Was the mask at 40 degrees Celcius/104 degrees fahrenheit (warm) with domestic washing detergent.
• To prevent possible damage from incorrect heat settings it is recommended the mask ks not tumble dried and that it be allowed to air-dry/line-dry.

To extend the life of the lenses, clean and store your eye wear away from direct sunlight and at room temperature when not in use.  To clean and disinfect standard lenses only use the Revision Lens Cleaner.  The only alternative to the Revision Lens Cleaner is using a diluted solution of lukewarm water and dish soap; wash, rinse and blot dry with a microfibre cloth.

• Care should be taken not to scratch the lens at all times.  Only use minimal force during cleaning.
• Do not use ammonia, alkaline cleaners, disinfectant sprays/wipes, abrasive cleaning compounds or solvents wehn cleaning the lens.
• Exposure to or contact with chemical vapours or liquids may cause surface cracks or other damage.
• Examine the lens frequently and replace it immediately if there are any signs of damage or cracking.

Usage Guidelines

• Intended only for supervised training conducted in accordance with UTM safety training protocols by law enforcement, military or professional training and security organizations.
• Verify that all PPE is correctly fired, ensuring there are no exposed areas of the skin.
• UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or any of its products.

Data Sheet

Click here for Non-Berry Compliant Face Mask with Integrated Goggles technical data sheet.